All About Guitars

Master bartending with Howcast’s Mixology app – http://howc.st/lVWXTv

Expand the description and view the text of the steps for this how-to video.

Check out Howcast for other do-it-yourself videos from KeithMcKellar and more videos in the General Music Business category.

You can contribute too! Create your own DIY guide at http://www.howcast.com/videos/new or produce your own Howcast spots with the Howcast Filmmakers Program at http://www.howcast.com/filmmakers/apply.

Whether your strings pop, or simply start sounding lifeless, you’ll need to know how to change them.

To complete this How-To you will need:

A guitar
Wire cutters
New strings
A string winder (optional)
A tuner (optional)

Warning: Never remove all six strings at the same time, which disrupts the balance of tension, making it necessary to reset the guitar’s neck, or adjust the bridge.

Step 1: Remove the string

Rotate the tuning peg to unwind the popped or old string, and extract it from the tuning peg. Using the wire cutters, snip off the crimped part of the string, throw it away, and slip the rest of the string off the guitar, being careful not to let the tip of the string scratch the finish. Throw the old string away.

Tip: Use a string winder to unwind the string quickly.

Step 2: Get the new string ready

Remove and unravel the new string from your pack. Check the package to make sure you’re using the correct gauge string.

Step 3: Line up the tuning peg with the neck

Stand the guitar up on its end. Turn the tuning key so that the hole in the tuning peg is in line with the neck — not perpendicular to it.

Step 4: Thread the string

Thread the tip of the nonball end of the string through the tailpiece, over the bridge (making sure it’s in the proper groove in the bridge piece), up the neck, and over the nut. Anchor the string under the correct tree, if your guitar has them. Thread the end of the string through the hole of the tuning peg, from the top.

Tip: Some electric guitars require you to begin threading the string through the back of the guitar.

Step 5: Tighten the string

Hold the string against the nut, leaving a few inches of slack. Turn the tuning key three to four times away from the headstock, allowing the slack end of the string to tighten. Do not tighten too much, which could cause the string to break.

Step 6: Snip the end

Crimp the end of the string at a right angle away from the headstock, a half-inch from the tuning peg, and cut the string a half-inch past the crimp.

Step 7: Tune the string

Tune the string, either by ear or by using a tuner.

Tip: “Bend” the string up and down on each fret as you’re tuning to help break it in.

Step 8: Move on to the next string

Once your string is in tune, cut any excess string and move on to the next one.

Thanks for watching How To String an electric guitar! If you enjoyed this video subscribe to the Howcast YouTube channel! http://www.youtube.com/subscription_center?add_user=howcast

Duration : 0:2:35

Read the rest of this entry »

Technorati Tags: arts, electric, guitar, Music, performing, Re, Recreation, string, strings

Related Articles

1. Latest Rhythm Guitar Auctions …
2. E-Cig Health and Wellbeing Risks - Is Electric Cigarette Harmless? …
3. Online Guitar Lessons Using Video …

Trackbacks

1. Peavey VYPYR Tube 120 120W 2x12 Guitar Tube Amp …
2. Latest Learn Guitar Songs Auctions …
3. [WATCH]: Katy Perry ET Music Video Makeup Tutorial …
4. [WATCH]: DJ Groove - Ti ne so mnoy (Vitalik Vitamin Remix) ... russian house: electro & dance music 46 …